|
Paddle Type Flow Switch We make indicating type, magnetically actuated flow switches that are designed for positive detection of fluid flow through your equipment. These are suitable for Water, Kerosene, Lubricating oils of low viscosity etc. These are available in 6 sizes i.e.1/4, 3/8, 1/2, 3/4, 1 and 11/4 BSP. Suitable size may be selected from actual flow rate. Flow range covered is from 1 to 150 LPM. Fluid Flow in the System is seen through transparent tube.
Construction
The clearance between the float and inner surface of the transparent tube are large enough to let floating particles to pass through, eliminating the chances of clogging. This also reduces the pressure drop across the switch. All switches are strong and lightweight. Adequate magnetic shielding is provided as an in-built feature, enabling the user to mount the switch in any location. Usually epoxy powder coated body in brown colour is provided.
Technical Specifications
| Max. System Pressure |
2 10 Kg / cm (150 psi) |
| Temperature Range |
80C to 1200C. |
| Electrical |
Hermetically sealed reed switch, 80AT type 500mm long two core wire. |
| Contact Rating |
NO type contact rated for 1 amp 230 Vac (resistive). |
| [Please take care of surge currents to avoid damage of Reed switch element. In such cases please apply R.C. Network (Resistor & Capacitor)]. |
|
